| 中文版
| English
Contact Numbers：
Jim Fong +86-189-2578-2406
Mr. Chai: +86-189-2578-9550
Mr. Chai: +86-189-2578-9550
Popular Keyword:
ProductsMore>>
Contact usMore>>
Best Regards
Company Name: Dongguan Tianfa Communication Technology Co., Ltd.
Website: www.gpsdgtf.com
https://tianfatongxun.1688.com
Jim Fong
Phone/WeChat: +86-189-2578-2406
Skype:qingfeng8003021
Tel/Fax: +86-769-87880818
Company Name: Dongguan Tianfa Communication Technology Co., Ltd.
Website: www.gpsdgtf.com
https://tianfatongxun.1688.com
Jim Fong
Phone/WeChat: +86-189-2578-2406
Skype:qingfeng8003021
Tel/Fax: +86-769-87880818
E-mail: jimfong@dgtftx.net
Address: 5th Floor, Block B, Huazhi Innovation Valley, 7 Yuhua Street, Tangxia Town, Dongguan City, Guangdong Province, ChinaReciprocity in antenna measurement
source: Published:2019-05-29 16:45:05Click to rate：
The working state of the tested antenna in antenna measurement can be either transmitting state or receiving state. This can be flexibly selected according to the measurement content, measurement equipment, site conditions and other factors. According to the principle of antenna reciprocity, the results of measuring the parameters of the antenna in two working states should be consistent.
However, in practical measurement, the reciprocity principle must be applied under certain conditions.
(1) Antenna must be linear and passive, such as satellite TV receiving antenna, whose feed is integrated with LNB, and can not be used for transmission.
(2) The impedance matching of transceiver system should be good. Although there are multiple reflections between the antenna to be measured and the source antenna, this effect is not serious due to the attenuation of free space propagation. The impedance matching between source antenna, feeder, signal source, antenna to be measured, feeder and receiver is an important condition to satisfy reciprocity principle.
(3) When switching the antenna, there are no active devices in the transceiver branch, such as power amplifier, low noise amplifier, mixer, etc.
However, in practical measurement, the reciprocity principle must be applied under certain conditions.
(1) Antenna must be linear and passive, such as satellite TV receiving antenna, whose feed is integrated with LNB, and can not be used for transmission.
(2) The impedance matching of transceiver system should be good. Although there are multiple reflections between the antenna to be measured and the source antenna, this effect is not serious due to the attenuation of free space propagation. The impedance matching between source antenna, feeder, signal source, antenna to be measured, feeder and receiver is an important condition to satisfy reciprocity principle.
(3) When switching the antenna, there are no active devices in the transceiver branch, such as power amplifier, low noise amplifier, mixer, etc.
Previous：Typical configuration of antenna measurement
Next：Internet of Things is ubiquitous in smart home
This article Tags tags：
Copyright 2019 Copyright, Dongguan Tianfa Communication Technology Co., Ltd.
Technical Support:Dongguan website construction
